To initiate an accounting on/off message from a RADIUS server policy
Purpose
Perform the following procedure to manually send an Accounting On or Accounting Off message from a RADIUS server policy. The command is enabled only on a RADIUS sever policy that is configured as the controller in an accounting on/off group. In order to perform this procedure, the RADIUS server policy must be distributed to an NE (see Chapter 49, Policies overview).
Steps
1 |
Choose Policies→AAA Policies→RADIUS Server Policies from the NFM-P main menu. The Manage Radius Server Policies form opens. |
2 |
Select a RADIUS server policy and click on the Properties button. The RADIUS Server Policy (Edit) form opens. |
3 |
Click on the Send Accounting On/Off Message button and confirm the action. |
4 |
In the Accounting On/Off Operation form, configure the Action parameter. |
5 |
Click OK to send the Accounting On or Accounting Off message. |
6 |
Close the forms. End of steps |