To retrieve I&C files stored by Wavence Release 22 or earlier devices using the NFM-P

Prerequisites

Use this procedure to retrieve I&C files stored on MSS-4/8 Wavence devices, Release 22 or earlier. For devices using Release 23A or later, see To retrieve I&C files stored by Wavence Release 23A or later devices using the NFM-P.

Steps
 
1 

Choose Administration→NE Maintenance→I&C Parameters Retrieval. The I&C Parameters Retrieval window opens.

2 

Click Search. The I&C Parameters Retrieval Status window lists the Wavence nodes. Click the Retrieve Radio RSL button and click Yes on the confirmation window.

3 

The RSL File Retrieval Status column is updated with the retrieval status, which is limited to one of the following:

  • If the CLI login credentials on the NE does not match the login credentials in CLI panel of the read and write mediation policy, an “Authentication failed” message is displayed.

  • If there are no RSL CSV files on the NE, an "RSL Files does not exist on NE" message is displayed. File generation is performed using the WebCT interface.

  • If there is an RSL CSV file for a radio port on the NE, the file is retrieved and the RSL status is updated.

End of steps