The 7701 CPAAs you are upgrading must be administratively down. To turn down the 7701 CPAA, perform the following:

1. Choose Tools→Route Analysis→Admin Domains/CPAAs from theNFM-P main menu. The Admin Domains/CPAAs form opens.

2. Choose CPAA (CPAM: Topology) from the object drop-down and click Search. A list of discovered 7701 CPAAs appears.

3. For each 7701 CPAA that you need to turn down, double-click on the entry in the list. The CPAA (Edit) form opens.

4. Set the Administrative State parameter to Down and click Apply.

5. Close the CPAA (Edit) form.

6. Close the Admin Domains/CPAAs form.

Import the new 7701 CPAA software image into the NFM-P database.

1. Copy or move the files to a location that is accessible to the NFM-P.

   The required files are:

   • boot.tim

   • both.tim

   • md5sums.txt

   Ensure that the required files are all within the same folder. For more information see “To import device software files to the NFM-P” in the NSP NFM-P User Guide.

2. Choose Administration→NE Maintenance→Software Upgrade from the NFM-P main menu. The Software Upgrade form opens.

3. Click on the Software Images tab, then on the SR Software Images subtab, if required.

4. Click on the Import button. The Open form opens.

5. Navigate to the directory that contains the software image and click Open. The Open form closes.

   The NFM-P verifies the file set, imports the files to the database, and displays an entry for the imported image in the list on the Software Images tab.

   For the 7701 CPAA, the Target Product name is Alcatel-SR/ESS-7XXX by default.

6. Confirm that the image is valid, and is the correct version.

Create a 7701 CPAA software upgrade policy.

1. Click on the Software Upgrade Policy tab, then click Create. The Software Upgrade Policy (Create) form opens.

2. Configure the following parameters:

   • Policy ID

   • Auto-Assign ID

   • Name

   • Policy Type

   • CFlash Image Root Path

   • CFlash Backup Root Path

   You must choose SR Based Node as the Policy Type.

   The 7701 CPAA Revision 2 hardware supports only one compact flash, designated as cf1. Ensure that you specify cf1 when you configure the CFlash Image Root Path and CFlash Backup Root Path parameters.

3. Enable the Software Download parameter and click Apply. The Software Upgrade Policy (Create) form refreshes with additional tabs, and the form name changes to Software Upgrade Policy (Edit).

Assign the policy to the required 7701 CPAAs.

1. Click on the Software Upgrade Policy Assignment tab. The Software Upgrade Policy (Edit) Filter form opens.

2. Configure a filter, if required, and click OK. A list of CPAAs is displayed in the Unassigned Sites panel.

3. Select one or more 7701 CPAAs in the Unassigned Sites list and click on the right-arrow button to move them to the Assigned Sites list.

4. Click OK and confirm the action. The policy is assigned to the NEs, and the Software Upgrade Policy (Edit) form closes. The Software Upgrade form is displayed.

Perform the 7701 CPAA upgrade.

1. On the Software Upgrade form, click on the Software Images tab.

2. Select the new 7701 CPAA software image that you imported in Step 2 and click Upgrade Sites. The Select Sites form opens.

3. Select one or more 7701 CPAAs from the list and click OK, then confirm the action.

The NFM-P downloads the software to the selected 7701 CPAAs, in the directory TiMOS-B-Release number, where Release number is the version of the downloaded software.

Open a CLI session on each CPAA to perform the following:

• Modify the NVRAM.DAT and bof.cfg files to point to the new files in TiMOS-B-Release number.

• Verify that the upgrade was successful

• Reboot the upgraded 7701 CPAAs

See To install or upgrade the 7701 CPAA Hardware Revision 2 OS software using a CLI .

End of steps