Ports and Interfaces Utilization Details report

Ports and Interfaces Utilization Details report overview

The Ports and Interfaces Utilization Details report shows utilization information about network and/or access interfaces associated with existing termination objects (port, LAG, or bundle) for all possible modes (network, access, or hybrid).

Use cases

Capacity planning—Use the report to examine port and interface utilization patterns for planning future capacity requirements.

Limitations

Minimum and maximum throughput aggregation cannot be compared with the minimum and maximum throughput values generated from raw granularity.

Prerequisites

The following table describes the aggregation rules that must be enabled and the file and accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring file and accounting policies. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 11-19: Ports and Interfaces Utilization Details report prerequisites

Monitored object class	Statistics class	Statistics collection	MIB name	NE types
equipment.PhysicalPort	equipment.InterfaceAdditionalStats	MIB-based	IF-MIB.ifXEntry	7210 SAS-D 7210 SAS-MXP 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
lag.Interface	equipment.InterfaceAdditionalStats	MIB-based	IF-MIB.ifXEntry	7210 SAS-D 7210 SAS-MXP 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
bundle.Interface	equipment.InterfaceAdditionalStats	MIB-based	IF-MIB.ifXEntry	7210 SAS-D 7210 SAS-MXP 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
rtr.NetworkInterface	equipment.InterfaceAdditionalStats	MIB-based	IF-MIB.ifXEntry	7210 SAS-D 7210 SAS-MXP 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
mpls.Interface	mpls.MplsInterfaceStats	MIB-based	TIMETRA-MPLS-MIB.vRtrMplsIfStatEntry	7210 SAS-D 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
rtr.NetworkInterface	rtr.IpInterfaceAdditionalStats rtr.IpInterfaceStats rtr.SarIpInterfaceStats	MIB-based	TIMETRA-VRTR-MIB.vRtrIfStatsEntry TIMETRA-VRTR-MIB.vRtrIfStatsExtEntry	7210 SAS-D 7210 SAS-R 7250 IXR 7705 SAR 7750 SR
service.AccessInterface	service.CompleteServiceEgressPacketOctets	Accounting, file, and log policies	completeSvcInEg policy	7250 IXR-R6 7750 SR
service.AccessInterface	service.CompleteServiceIngressPacketOctets	Accounting, file, and log policies	completeSvcInEg policy	7250 IXR-R6 7750 SR
service.AccessInterface	service.ServiceEgressOctets	Accounting, file, and log policies	svcIngressOctet policy	7210 SAS-D 7210 SAS-MXP 7210 SAS-R
service.AccessInterface	service.ServiceIngressOctets	Accounting, file, and log policies	svcEgressOctet policy	7210 SAS-D 7210 SAS-MXP 7210 SAS-R
equipment.PhysicalPort	ethernetequipment. Dot3Stats (only supported at the port level)	Performance statistics	EtherLike-MIB. dot3StatsEntry	7210 SAS 7250 IXR 7705 SAR 7750 SR

Report characteristics

The following table lists the principal report characteristics.

Table 11-20: Ports and Interfaces Utilization Details report characteristics

Characteristic	Value
Data type	Statistics
Source database	Auxiliary database
Report inputs	Prompt	Notes
	End date	Calendar date or relative date (for example, two days ago) and time
	Report range	Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), weeks (w), or months (months, m)
	Granularity	Aggregation types: None (raw data) Hourly Daily Weekly Monthly
	Threshold value	Specify the threshold value
	Region
	Subregion	Only subregions below the top-level region are displayed in the prompt. Objects in the lower subregions are automatically selected when their subregion is selected.
	KPI	Max Tx Throughput Min Tx Throughput Avg Tx Throughput Max Rx Throughput Min Rx Throughput Avg Rx Throughput Tx Volume Rx Volume Max Tx Utilization Min Tx Utilization Avg Tx Utilization Max Rx Utilization Min Rx Utilization Avg Rx Utilization Max Utilization Min Utilization
	Interface	Search using partial names or wildcard (%). Select individual items or click Select All.
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports. Note: The report displays all content on one page regardless of whether the check box is enabled.
Drill-down support	No