Radio Links Summary report

Radio Links Summary report overview

The Radio Links Summary report displays a summary of the near end and far end details of radio links in the network, showing utilization, link availability, and peak throughput values of the links.

Note:

General data is based on the near end details for TX Frequency, Rx Frequency, Channel Bandwidth, Modulation, Wan Capacity, Link Configuration, and XPIC
Detect time corresponds to the maximum throughput value
WAN peak utilization is determined using the maximum values of the near end and far end utilization, and the corresponding link throughput and detect time.

Limitations

Report limitations include:

When the report is exported to the RTF, DOCX , or ODT formats, elements the report table may not be aligned correctly.
Minimum and maximum throughput aggregation cannot be compared with the minimum and maximum throughput values generated from raw granularity.

Prerequisites

Wavence nodes and radio links must be discovered using NSP Classic management in order to be displayed in the report.

Note: When statistics collection is not enabled in NSP Classic management, some report parameters are displayed at their default value. The following table describes the parameters, the default values that are displayed, and the related statistic.

Parameter	Default displayed	Statistic
RSL (min/max)	-99	RSL Hop History Data stats (15Min)
ODU temp	-99	UBT/MPT Equipment measurement
Throughput	0	Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats
Utilization	0	Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats
Detect Time	N/A	Peak And Average Throughput and Link Utilization History Data Stats (15Min)/AggrTxEthernetStats
Link Availability	0	PdhFrameHopHistoryDataStats24HrLogRecord

The following table lists the statistics that must be collected; see the NSP NFM-P Statistics Management Guide for information about configuring statistics collection.

Table 15-27: Radio Links Summary report prerequisites

Monitored object class	Statistics class	Statistics collection	MIB	NE types
Port /LAG	Ethernet	Ethernet Aggregate Tx Stats	ethAggrMaintTxEntry	Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, Wavence UBT-SA, Wavence UBT-I, Wavence UBT-T XP, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA
	RSL	RSL Hop History Data stats (15Min)	opticsIMRSLHopHistoryDataEntry
	G.826	Hop History Data stats (24Hr)	opticsIMPdhFrameHopHistoryDataEntry
	Peak Throughput, Average Throughput Peak Link Utilization, Average Link Utilization	Peak And Average Throughput and Link Utilization History Data Stats (15Min)	opticsIMPeakAndAverageHistoryDataEntry
	MPR	UBT/MPT Equipment measurement	opticsIMEquipmentExtenEntry

Report characteristics

The following table lists the principal report characteristics.

Table 15-28: Radio Links Summary report characteristics

Characteristic	Value
Data type	NE configuration information
Source database	NSP database
NE types supported	Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA
NE types supported	Support is limited to NEs found in the network.
Report inputs	Prompt	Notes
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill Down	Yes. Click on the link in the Radio Link column to display the Radio Link Inventory report. See Radio Link Inventory report

Example

The following figures show a report example.