Router Level Usage Summary with Baseline report

Router Level Usage Summary with Baseline report overview

The Router Level Usage Summary with Baseline report shows a router-level summary of the traffic rate and volume for a specified time period. The current results are displayed along with baseline values. See Baselining in Analytics reports for more information about how baselines are defined.

The default display is a series of line graphs showing throughput, and a series of bar charts showing volume.

For the first three line graphs, showing bandwidth per router, the baseline for one selected router is shown. For the charts showing volume by application group, one baseline per application group is shown. A small number of application groups improves report legibility.

Use cases

Capacity planning—Use the report to examine deviations from past traffic and usage patterns to identify anomalies that may require intervention.

Report characteristics

The following table lists the principal report characteristics.

Table 8-9: Router Level Usage Summary with Baseline report characteristics

Characteristic

Value

Statistics type

AA Accounting per partition application group

NSP Flow Collector required

No

Report inputs

Prompt

Notes

End date

Calendar date or relative date (for example, two days ago) and time

Granularity

Aggregation types:

  • Hourly

  • Daily

  • Monthly

  • None (raw data)

Report range

Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), weeks (w), or months (months, m)

Node Type

Search using partial names or wildcard (%).

Select individual items or click Select All.

Node

Application Group

Enable Baseline

Select the check box to include baseline data in the report.

Baseline End Date

Calendar date or relative date (for example, two days ago) and time

Baseline Report Range

Length of time to calculate the baseline, in minutes, hours, days, or months

A longer baseline range will improve baseline accuracy.

Baseline Definition

Select a definition to calculate the baseline. For example, “hour of day” means that current data is compared against the baseline calculated from the historical data from the same hour within the baseline time frame.

Baseline Node for Throughput

Select one NE to use as an example for baseline data in throughput graphs.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.

The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Drill-down support

No

Example

The following figures show a report example.

Figure 8-22: Router Level Usage Summary with Baseline report—total bandwidth per router
Router Level Usage Summary with Baseline report—total bandwidth per router
Figure 8-23: Router Level Usage Summary with Baseline report—download bandwidth per router
Router Level Usage Summary with Baseline report—download bandwidth per router
Figure 8-24: Router Level Usage Summary with Baseline report—upload bandwidth per router
Router Level Usage Summary with Baseline report—upload bandwidth per router
Figure 8-25: Router Level Usage Summary with Baseline report—total volume, all application groups
Router Level Usage Summary with Baseline report—total volume, all application groups
Figure 8-26: Router Level Usage Summary with Baseline report—download volume, all application groups
Router Level Usage Summary with Baseline report—download volume, all application groups
Figure 8-27: Router Level Usage Summary with Baseline report—upload volume, all application groups
Router Level Usage Summary with Baseline report—upload volume, all application groups