Port Throughput Summary report

Port Throughput Summary report overview

The Port Throughput Summary report shows bandwidth utilization by specified ports. The default display is a set of time series graphs, showing total, ingress and egress.

The top 5 ports with the highest throughputs are shown in the report plots.

The summary table shows the minimum, average, and maximum throughput values and the average utilization, along with percentiles, for all the ports selected. The summary table displays the ports in descending order of average total throughput. The report also shows information such as the total count of errors of all types for the port. You can drill-down into the Port/LAG Details report to see the full breakdown of specific errors on the port.

If a percentile value from 1 to 99 is entered in the Percentile input, the selected percentile value of the data is shown in the table.

The values entered in the ingress, egress, and total threshold input prompts are compared with the average of ingress, egress, or total values and accordingly the records or rows in the table are highlighted. The highlighted rows (that is, the average values) are populated in the three rows above the table.

Additionally, the plot or graph shows the actual values at a specified time.

Use cases

Capacity planning—Use the report to examine traffic usage and patterns on a port, LAG, or MC LAG basis, to plan for capacity requirements.

Prerequisites

The following tasks need to be performed using NSP Classic management for Port Throughput Summary reports to be created:

• Interface Additional Statistics (Physical Equipment) must be enabled on the port; see information in the NSP NFM-P Statistics Management Guide about creating or editing a MIB statistics policy using a bottom-up method.

• For a Service Utilization per Port report to be available as a drill-down, a Complete Service Ingress Egress accounting policy must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. The accounting policy must be assigned to the SAPs of each service represented in the Utilization reports. If there is no accounting policy, the Port Throughput Summary report will be available, however, if you click on an entry in the Average Utilization (%) column, the Service Utilization per Port drill-down report will not be generated.

• For a Port Forwarding Class Details report to be available as a drill-down, a Complete Network Ingress Egress accounting policy must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information. The accounting policy must be assigned to the ports or LAGs for which the Forwarding Class Details reports will be created. If there is no accounting policy the Port Throughput Summary report will be available, however, if you click on an entry in the Minimum column, the Port Forwarding Class Details drill-down report will not be generated.

• You must configure SAP on an access port. When an access port is not configured with SAP, the drill down from Port Throughput to Service Utilization per Port Details does not generate a report and shows a warning in the input prompts.

The following table describes the aggregation rules that must be enabled and the accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring an accounting policy. To view the report for granularities other than raw data, the aggregation rules must be enabled; see How do I configure analytics aggregation?.

Table 14-2: Port Throughput Summary report prerequisites

Aggregator name	Monitored object class	MIB name	Statistics class	Statistics collection	NE types
Interface Utilization Statistics Aggregator	equipmet.PhysicalPort lag.interface	ifXEntry	equipment.InterfaceAdditionalStats	Performance statistics	7210 SAS 7250 IXR 7705 SAR 7750 SR
PortNetIngressStats Error Stats Aggregator	equipment.PhysicalPort	TIMETRA-PORT-MIB.tmnxPort NetIngressStatsEntry	equipment.PortNetIngressStats	Performance statistics	7705 SAR 7705 SAR-Hm
PortNetEgressStats Error Stats Aggregator	equipment.PhysicalPort	TIMETRA-PORT-MIB.tmnxPort NetEgressStatsEntry	equipment.PortNetEgressStats	Performance statistics	7705 SAR 7705 SAR-Hm
Dot3Stats Error Stats Aggregator	equipment.PhysicalPort	EtherLike-MIB.dot3StatsEntry	ethernetequipment.Dot3Stats	Performance statistics	7210 SAS 7250 IXR 7705 SAR 7750 SR
Interface Error Stats Aggregator	equipmet.PhysicalPort lag.interface	ifEntry	equipment.InterfaceStats	Performance statistics	7210 SAS 7250 IXR 7705 SAR 7750 SR
EthernetStats Error Stats Aggregator	equipment.PhysicalPort	etherStatsEntry	ethernetequipment.EthernetStatsLogRecord	Performance statistics	7210 SAS 7250 IXR 7705 SAR-Hm 7750 SR
AdditionalEthernetStats Error Stats Aggregator	equipment.PhysicalPort	tmnxPortEtherEntry	Ethernetequipment. AdditionalEthernetStats	Performance statistics	7210 SAS 7250 IXR 7705 SAR 7705 SAR-Hm 7750 SR
IngressPortFwdEngDropReasonStats Error Stats Aggregator	equipment.PhysicalPort	TIMETRA-PORT-MIB.tPortIngressFwdEngDRStatsEntry	equipment.IngressPortFwdEngDropReasonStats	Performance statistics	7250 IXR 7705 SAR-Hm 7750 SR

Report characteristics

The following table lists the principal report characteristics.

Table 14-3: Port Throughput Summary report characteristics

Characteristic	Value
Data type	Statistics
Source database	Auxiliary database
Report inputs	Prompt		Notes
	End date		Calendar date or relative date (for example, two days ago) and time
	Granularity		Aggregation types: None (raw data) Hourly Daily Monthly
	Report range		Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), or months (months, m)
	NE Types		Search using partial names or wildcard (%). Select individual items or click Select All.
	Node Name (or Node Name Pattern)
	Nodes
	Port Modes		Select Access, Network, or Hybrid. Select individual items or click Select All.
	Port-LAG/MC LAG		Select one radio button
	Port Name (or Port Name Pattern)		Search using partial names or wildcard (%). Select individual items or click Select All.
	Physical Ports / LAGs / MC LAGs
	Ingress Threshold		Specify in bps/Kbps/Mbps/Gbps
	Egress Threshold
	Total Threshold
	Average total utilization threshold		—
	Average ingress utilization threshold
	Average egress utilization threshold
	Percentile		Identify a percentile of interest between 1 and 99.
	Logo Resource ID		The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position		Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show report output on one page		Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill-down support	Yes: Click on an entry in the Port/LAG column to open the Port/LAG Details report for the selected port or LAG. Click on an entry in the Average Utilization (%) column to open the Service Utilization per Port report for the selected port. Click on an entry in the Minimum column to open the Port Forwarding Class Details for the selected port or LAG.

Example

The following figures show report examples.

Figure 14-1: Port Throughput Summary report—Total traffic

Figure 14-2: Port Throughput Summary report—Ingress traffic

Figure 14-3: Port Throughput Summary report—Egress traffic

Figure 14-4: Port Throughput Summary report—Summary table