To view L2-VPN route targets


1	Perform To retrieve BGP information from a CPAA to retrieve BGP AS information from a CPAA.
2	Choose Tools→Route Analysis→BGP Network Data from the NFM-P main menu. The BGP Network Data form opens.
3	Choose L2-VPN Route Target (CPAM: Topology) from the object drop-down menu.
4	Click on the Search button. A list of timestamped L2-VPN RT entries appears.
5	Choose an entry and click on the Properties button. The L2-VPN Route Target (Edit) form opens with the General tab displayed.
6	View the following information: RT CPAA AS number CPAA confederation number, if applicable number of routes timestamp of retrieval RT format — AS (2 Byte ASN), AS (4 Byte ASN), or IP Address RT AS value, if applicable RT extended community value, if applicable IP address of the RT, if applicable RT community value, if applicable
7	Click on the Advertising Next Hops tab.
8	Choose an entry and click on the Properties button. The Next Hops (Edit) form opens.
9	View the following information: IP address of the next hop L2-VPN route count
10	Close the Next Hops (Edit) form.
11	Close the IP VPN Route Target (Edit) form.
12	Close the BGP Network Data form. End of steps

Use subject to agreed restrictions on disclosure and use.