Workflow to manage shelf objects on Wavence devices

Workflow sequence

The following workflow describes the sequence of high-level tasks required to manage Wavence device shelf objects. For general shelf object management information, see the “Shelf and card object configuration” chapter of the NSP NFM-P Classic Management User Guide.

Process


1	Configure NTP; see the “Shelf and card object configuration” chapter of the NSP NFM-P Classic Management User Guide.
2	Configure the card, card slot, and fan objects, and card and port protection using a Wavence element manager; see the Wavence documentation.
3	If required, configure synchronization using SYNC-IO SFPs on the CorEvo card or MSS-1 shelf; see To configure synchronization on a CorEvo card or MSS-1 shelf using SYNC-IO SFPs.
4	If required, configure a 1588 transparent clock; see To configure an IEEEv2 1588 TC on a Wavence shelf.
5	Upgrade the device software, as required; see Chapter 4, Wavence software upgrade.
6	As required, migrate a Wavence SA connected to a 7705 SAR from standalone mode to single NE mode; see To migrate the Wavence UBT-SA connected to a 7705 SAR from standalone mode to single NE mode.
7	As required, switch between an in-service protected Radio link and a standby protected Radio link for Wavence devices using a Wavence element manager.