Choose Administration→Discovery Manager from the NFM-P main menu. The Discovery Manager form opens.

Click Create. The Specify General Attributes step form opens.

Configure the required parameters.

Select a equipment group.

Note: If the selected equipment group reaches the maximum element limit, any additional discovered NEs are automatically added to the Discovered NEs group.

Set the Discovery Protocol parameter as SNMP.

Click Next. The Add Rule Elements form opens.

Click Create to add a new rule element. The Topology Discovery Rule Element (Create) form opens.

Configure the required parameters and click OK.

Click Next. The Add Auto Discovery Rule Elements ACL form opens.

Retain the default values and click Next. The Configure Mediation Security form opens.

Select the SNMPv3 mediation security policy for read, write, and trap access, and the default mediation policy for security access, and click Next.

Retain the default values for all other parameters in the remaining step forms.

Click Finish.

Result: The Wavence SCM device is discovered in the NFM-P. The device appears on the equipment navigation tree and the topology map.

Perform the following to view the device properties:

1. Right-click on the device and choose properties. The Network Element (Edit) form opens.

2. Click on the System Settings tab and the SNMP Mode parameter displays the read-only value as Secured Certified.

Save your changes and close the form.

End of steps