Perform one of the following to open the Composite Service (Create) form:

1. Choose Create→Service→Composite Service from the NFM-P main menu. The Composite Service (Create) form opens.

2. Perform the following:

   1. Choose Manage→Service→Composite Services from the NFM-P main menu. The Manage Composite Services form opens.

   2. Click Create. The Composite Service (Create) form opens.

Configure the required general parameters.

The Composite ID parameter is configurable only if the Auto-Assign ID parameter is disabled.

Click Apply.

Save the changes and close the forms.

Choose Manage→Service→Composite Services from the NFM-P main menu. The Manage Composite Services form opens.

Select the composite service and click Properties. The Composite Service (Edit) form opens.

In the service navigation tree, right-click on the Services icon and choose Add Services. The Add Services form opens.

Note: You can also configure a service for inclusion in the composite service by right-clicking on the Services icon and choosing Create Service Type.

Select the VPLS and microwave backhaul services and click OK. The site and adjacencies appear on the navigation tree.

Note: The Composite Service panel parameters are updated on the Microwave Backhaul Service (Edit) form of the selected microwave backhaul services.

Right-click on the Connector object on the navigation tree and choose Connect Scp connector. The Scp connector (Create) form opens.

Select the microwave backhaul service and the VPLS service in the Service A and B panels and the sites involved in the Site A and B panels.

Click on the Service Connection Point tab and select the ports in the Service Connection Point A and Service Connection Point B panels.

Perform Step 9 to Step 11 for the remaining connectors.

Save the changes and close the forms.

End of steps