To initialize an L3 VLAN ID

Steps
Using Bulk Operation
 
1 

Choose Tools and select Bulk Operations. The Bulk Operations form opens.

2 

Click Create. The Create Bulk Change (New) form opens.

  1. Type the VLAN ID name.

  2. Expand the Admin State drop-down menu and select Enable.

  3. Expand the Object Type drop-down menu, expand the MPR tree, and select System Settings.

  4. Click Next and on the Specify the Filter window, click Next.

  5. Expand Attribute, then General, and then IP Data Plane Settings.

  6. Double-click on L3 VLAN ID and enter the VLAN ID to be created. Click Next.

    Note: VLAN ID should be the same across all the L3VPN nodes configured in the specified network or cluster.

  7. Change review window displays the configured attributes along with the VLAN value.

  8. Select the View newly created bulk change check box and click Close.

    The Bulk Change (Edit) form opens.

3 

Select the VLAN attribute you created and click Batch Control tab.

4 

Click Generate Batches to generate the first set of 20 VLAN IDs, and click Execute.

5 

Double-click on the Batch ID row to view the Batch Items.

Configure individually
 
6 

In the navigation tree equipment view, right-click on a Wavence device object in the equipment tree and choose Properties. The Network Element (Edit) form opens.

7 

Click System Setting tab and configure the L3 VLAN ID under the IP Data Plane Settings.

8 

Click OK to save and close the form.

End of steps