To move Wavence backhaul sites

Steps
Configure a service
 
1 

Perform one of the following to open the Microwave Backhaul Service (Create) form:

  1. Choose Create→Service→Microwave Backhaul from the NFM-P main menu. The Microwave Backhaul Service (Create) form opens.

  2. Perform the following:

    1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

    2. Click Create→Microwave Backhaul. The Microwave Backhaul Service (Create) form opens.

2 

Configure the VLAN ID with the value of the original service from which you want the sites to be moved, and click Apply, to create a new microwave backhaul service into which you want to move the sites.

3 

Save the changes and close the form.

Move the sites to the service
 
4 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

5 

Choose the discovered service containing multiple service topologies and click Properties. The Microwave Backhaul Service (Edit) form opens.

6 

Click on the Sites tab and view the Topology column. The sites belonging to one topology will have the same IDs.

7 

Choose the sites with the same IDs and click Move to Another Service. The Select Services form opens.

8 

Choose the microwave backhaul service created in Step 1 to Step 3 and click OK. The Microwave Backhaul Service (Edit) form opens.

Connect service
 
9 

Click Connect Service to connect the topology. The Connect Attempted check box is selected.

10 

Check whether the Topology Misconfigured check box is selected. If selected, the parameter indicates that the configuration is incorrect.

Correct the configuration. The Topology Changed check box is selected automatically after the topology is modified.

Note: See Incorrect topology for more information about common causes of incorrect topologies.

11 

Click Connect Service again to connect the microwave backhaul service. If the Topology Misconfigured and the Topology Changed check boxes are deselected, the parameters indicate that the configuration is correct.

Note: Ensure that the connect operation is performed on both the moved service and the original discovered service.

End of steps