| |
|
1 |
Open Data Collection and Analysis Management, Tests.
|
2 |
In the Filter column at the left of the view, configure a filter and click RETRIEVE. The list of tests is populated, filtered according to your input.
Note: You can sort the list by clicking on a column header; however, the sorting function is not available for all columns.
|
3 |
To view test information, choose a test and click Test Details  .
The Test Details panel shows the test attributes, and the Tested Entities panel shows the list of entities. Information provided depends on the test type.
|
4 |
To view results of a test, select the test and click  (Table row actions), View Results.
The Test executions page opens, showing the executions and their results. Use the drop-down lists to filter by time frame and telemetry type as needed.
Note: After a test has executed, there is a brief processing delay before results are available. For tests that have just finished running, Nokia recommends that you wait a minimum of 5 s before viewing results.
|
5 |
Select a different time range for the test executions, if required. Choose a range from the drop down list, or configure a customized time range.
|
6 |
If required, choose a telemetry type from the drop-down list.
|
7 |
To see additional information columns on the Test executions page, click (Table row actions), Manage Columns. Select or de-select columns to suit your information needs.
Note: The sorting function is not available for columns on the Test executions page. By default, executions are sorted by Time Captured.
|
8 |
For more detailed information about a specific test, choose an execution and click Test result details  .
Information provided depends on the test type.
End of steps |