Open IP/Optical Coordination, Optical Service.

Select an optical service from the list for which you want to see the properties.

Click Info to view optical service properties.

The info panel displays only limited number of optical service properties.

Note:

• The Working Path Latency property is displayed in the panel only if the WS-NOC supported cards are used. See the WS-NOC NE Management Guide and WS-NOC OTN Guide for information on the supported cards

• The Working Path Latency property is displayed only for an unprotected optical service.

• The Working Path Latency and Protected Path Latency, both the properties are displayed only for a protected optical service.

• If the Working Path Latency property is not supported by the optical service, the latency upload to NRC-P is still supported by IP/Optical Coordination but not displayed on the info panel.

Note: The info panel for an optical service with two endpoints is different from the info panel for an optical service with three or four endpoints. In case of an optical service with more than two endpoints, the info panel displays optical services properties for each of the endpoints in their own tabs. For example, 4 endpoints means 4 individual tabs for each endpoint in the info panel. In case of two endpoints, the info panel displays optical services properties in one common tab.

Click More and select View All Properties.

A page opens and displays all properties of the selected optical service.

End of steps