How do I manually upload or withdraw optical SLRG and/or latency?

This procedure can be used to configure IP/Optical Coordination to manually upload or withdraw optical SRLG and latency information to the NSP host server.

 
1 

Open IP/Optical Coordination, IP-Optical Correlation.

2 

Perform one of the following:

  1. Click IP-Optical Upload/Withdraw for all png19.png at the top of the screen to perform a bulk modification of IGP links.

  2. Click More png13.png and choose IP-Optical Upload/Withdraw with an IGP link to modify that link.

3 

Choose one of the following from the contextual menu:

  • Upload SRLG - optical Shared Risk Link Groups (SRLGs) are retrieved from transport controllers, correlated with the corresponding IP links, and exported into the NSP host server in order to ensure optical diversity

  • Upload Latency - optical latency information is retrieved from the WS-RC, correlated with the corresponding IP links, and propagated into the NSP host server in order to circumvent delay measurements within the IP layer

  • Upload SRLG and Latency - both SRLGs and Latency information are retrieved and uploaded

  • Withdraw SRLG - previously-uploaded SRLGs are withdrawn

  • Withdraw Latency - previously-uploaded Latency is withdrawn

  • Withdraw SRLG and Latency - previously-uploaded SRLGs and Latency are withdrawn

End of steps