How do I run a worst case failure scenario?

Purpose

This procedure can be used to simulate a worst case failure scenario, in which multiple operational links are turned down.

Steps
 
1 

From the Path Simulation, Network Map, click Run Scenario and then choose one of the following:

  1. Choose Run Worst Case Failure on All Operational Links. Go to Step 3.

  2. Choose Run Worst Case Failure on Select Links. A list of available operational links appears. Continue to Step 2.

2 

Select one or more links from the list and click RUN SCENARIO.

3 

A dialog box appears, displaying the simulation's progress. When complete, click VIEW SIMULATION RESULTS.

4 

A list of links is displayed. Perform any of the following:

  1. Click Show on Map png6.png inline with any link to highlight that link on the path simulation network map.

  2. Click More png4.png inline with any link and choose LSP Paths Impacted to view a list of LSP paths that were affected by the selected link's failure.

  3. Click More png4.png inline with any link and choose Links Impacted to view a list of Links that were affected by the selected link's failure.

End of steps

© 2024 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.