To configure an MPLS DM session OAM diagnostic test from the STM

To configure an MPLS DM session OAM diagnostic test from the STM

Before you begin

Before you can execute an MPLS DM session test, the NE must be enabled to transmit or reflect the test frames. You can enable tests on NEs in the following two ways:

Manually, by enabling the MPLS-DM Admin Status parameter on the NE properties form, Globals tab, OAM subtab, in the OAM-PM MPLS panel. See To modify NE properties.
Automatically, by enabling the Force Enable MPLS-DM parameter on the MPLS Session tab during configuration of the PM session for the test; see To configure a PM session OAM diagnostic test from the STM.

Steps


1	Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager (STM) form opens.
2	Choose Create→Performance Monitoring→MPLS DM Session Test or select an existing MPLS DM test session object, and click Properties. The MPLS DM Test Session (Create\|Edit) form opens.
3	Configure the required parameters.
4	Select a PM session.
5	To view the bins configured for the test by your choice of PM sessions, perform the following: Click Properties for the selected PM session name. The PM Session (Edit) form opens. Click Properties for the displayed Bin Group Mgr Object ID. The Bin Group (Edit) form opens. Click on the Bins tab. Select the bin you want to view and click Properties. The Bin (Edit) form opens. Close the form after viewing the bin.
6	Save your changes and close the forms. End of steps