To configure GTP on a routing instance

Steps
 
1 

In the navigation tree routing view, expand Network→NE→Routing Instance.

2 

Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

3 

On the General tab, set the Enable GTP Uplink parameter to Enabled.

4 

Click on the GTP tab to configure S11 and uplink interfaces.

5 

Click on the On the S11 tab to configure S11 interfaces and peer profile mappings:

  1. On the Interfaces tab, click Create. The S11 Interface (Create) form opens.

  2. Select an interface and an APN policy.

  3. Save the changes and close the form.

  4. Click on the Peer Profile Mapping tab and click Create. The S11 Peer Profile Mapping (Create) form opens.

  5. Configure the Address Prefix and Prefix Length parameters.

  6. Select a Peer Profile.

  7. Save the changes and close the form.

6 

Click on the On the Uplink tab to configure an uplink interface and peer profile mappings:

  1. On the General tab, configure the APN Network Identifier and PDN Type parameters.

  2. Click on the Peer Profile Mapping tab and click Create. The Uplink Peer Profile Mapping (Create) form opens.

  3. Configure the Address Prefix and Prefix Length parameters.

  4. Select a Peer Profile.

  5. Save the changes and close the form.

7 

Save your changes and close the form.

End of steps