To configure DHCP clients on SAR devices

Overview

The SAR-Hm can be configured to support IP/MPLS services over WLAN. This requires that the SAR-Hm act as a WLAN station, and alternatively act as both an AP and station concurrently to create a WLAN topology as necessary.

You can configure DHCP clients on a network interface with WLAN or an Ethernet port.

The 7705 SAR-Hmc can be configured to support IP/MPLS services on Network Interface with Ethernet Port.

Steps


1	In the navigation tree routing view, expand Network→NE→Routing Instance→Interface.
2	Right-click on the interface that you want to configure and choose Properties. The Network Interface (Edit) form opens.
3	Click on the DHCP Client tab.
4	Click Create, or select a DHCP client and click Properties. The DHCP Client form opens.
5	Configure the required parameters.
6	Save your changes and close the forms. End of steps