To configure an MC IPsec peer

Steps
 
1 

Choose Manage→Redundancy→Node Redundancy from the NFM-P main menu. The Manage Node Redundancy form opens.

2 

Choose MC Peer Group (Multi-Chassis) from the drop-down menu and click Search. A list of MC peer groups is displayed.

3 

Select an MC peer group and click Properties. The MC Peer Group (Edit) form opens.

4 

Before you can configure an MC IPsec peer, you must administratively disable the tunnel groups associated with the peer site.

As required, administratively disable the associated tunnel groups.

  1. Click Properties beside the First Peer Site ID or Second Peer Site ID parameter in the MC IPsec panel. The MC IPsec (Edit) form opens.

  2. Click on the Tunnel Groups tab.

  3. Select a tunnel group and click Properties. The MC IPsec Tunnel Group (Edit) form opens.

  4. Set the Administrative State parameter to Down.

  5. Click OK. The MC IPsec Tunnel Group (Edit) form closes.

5 

Click on the General tab and configure the parameters.

6 

Click OK. The MC IPsec (Edit) form closes.

7 

Administratively enable the disabled tunnel groups.

Perform the following:

  1. Click Properties beside the First Peer Site ID or Second Peer Site ID parameter in the MC IPsec panel. The MC IPsec (Edit) form opens.

  2. Click on the Tunnel Groups tab.

  3. Select a tunnel group and click Properties. The MC IPsec Tunnel Group (Edit) form opens.

  4. Set the Administrative State parameter to Up.

  5. Click OK. The MC IPsec Tunnel Group (Edit) form closes.

8 

Close the MC Peer Group (Edit) form.

9 

Close the Manage Node Redundancy form.

End of steps