To configure 1830 VWM ports

Steps
 
1 

On the equipment tree, expand Network→1830–VWM-OSU NE→Shelf→Card Slot→Port object and choose Properties. The Physical Port (Edit) form opens.

2 

Configure the Description parameters on the General tab.

3 

Click on the States tab and configure the Administrative State parameter.

4 

Click on the Media Adaptor tab and view the parameters listed. You can verify the parameters using the device CLI.

5 

Click on the Port Specifics tab, and configure the required parameters.

  • Configure the Topology String 1 and Topology String 2 parameters.

  • Configure the AINS timer parameter.

    The AINS timer can be configured at the system level or at the port level. By default, all ports are AINS enabled and align to the AINS timer set by the system timer.

If you are configuring for the 1830 VWM TLU–200, configure the TLU–200 Specifics parameters.

6 

Save your changes and close the form.

End of steps