To configure Ethernet LAN ports on the 1830 VWM OSU and 1830 VWM SMM

Steps
 
1 

On the equipment tree, expand Network→1830–VWM NE→Shelf→Card Slot→Port object and choose Properties. The Physical Port (Edit) form opens.

2 

Configure the Description parameters on the General tab.

3 

Click on the States tab and configure the Administrative State parameter.

4 

Click on the Media Adaptor tab and view the parameters. You can verify the parameters using the device CLI.

5 

Click on the Port Specifics tab and configure the required parameters.

The AINS timer can be configured at the system level or at the port level. By default, all ports are AINS enabled and align to the AINS timer set by the system timer.

6 

Perform one of the following:

  1. For an 1830 VWM OSU, configure the Interface role from the drop-down menu.

    If Userdata is selected as the Interface Role, the TPID parameter is enabled. The TPID parameter is not available if you set the Interface Role parameter to Normal.

  2. For an 1830 VWM SMM, configure the MAU and Userdata parameters.

7 

Save your changes and close the form.

End of steps