To configure shelf craft port IP address on an 1830 VWM device

Steps
 
1 

Perform one of the following:

  1. From the device:

    1. On the equipment tree, right-click on the 1830 VWM device object and choose Properties. The Network Element (Edit) form opens.

    2. Click on the Shelf Craft Port tab. The craft port IP address of all the shelves except the OPS shelf are listed.

    3. Choose the shelf for which you need to configure the craft port IP address and click Properties. The Shelf Craft IP (Edit) form opens.

  2. From the shelf:

    1. On the equipment tree, expand Network→1830 VWM.

    2. Right-click on the shelf object (not OPS shelf) and choose Properties. The Shelf (Edit) form opens.

    3. Click on the Shelf Craft Port tab.

2 

Configure the parameters in the Shelf Craft IP Details panel.

Note:

  • The craft port IP address and the craft port gateway cannot be the same.

  • Ensure that the craft port IP address and the craft port gateway are in the same subnet.

3 

Save your changes and close the form.

End of steps