To add MAC address range entries to an OmniSwitch LPS port
Overview
Perform the following procedure to add a static MAC address to an OmniSwitch LPS port.
You can add up to eight MAC address range entries. The default entry with Low MAC Range value 00-00-00-00-00-00, and High MAC Range value FF-FF-FF-FF-FF-FF, is auto-created under LPS Learned MAC Ranges tab when a port is added as an LPS port. Overlapping of Low MAC range or High MAC range is not allowed.
Steps
1 |
In the navigation tree Routing view, expand Network→OmniSwitch NE→Bridge Instance. |
2 |
Right-click on the Bridge Instance Object icon and choose Properties. The Bridge Instance (Edit) form opens. |
3 |
Choose a port and click Properties. The Learned Port Security (Edit) form opens. |
4 |
Click on the LPS Learned MAC Ranges tab. By default, an entry of Low MAC range and High MAC range is displayed. |
5 |
Click Create. The MAC Range (Create) form opens. |
6 |
Enter the Low MAC Range and High MAC Range values. |
7 |
Click OK to save your changes. |
8 |
Repeat steps Step 5 to Step 7 to add up to eight MAC address range entries. |
9 |
Click Apply to save the changes and close the forms. End of steps |