To create IP path monitors for PTP peers

Steps
 
1 

Choose Tools→Synchronization Manager from the main menu. The Synchronization Manager form opens.

2 

Configure the filter criteria, if required, and click on the Search button.

3 

Choose a synchronization domain and click on the Properties button. The Synchronization Domain (Edit) form opens with the General tab displayed.

4 

Perform one of the following:

  1. To create IP path monitors at the synchronization domain level, click on the PTP Peers tab button.

  2. To create IP path monitors at the synchronization group level:

    1. Click on the Sync Groups tab button.

    2. Configure the filter criteria, if required, and click on the Search button.

    3. Choose a synchronization group in the list and click on the Properties button. The Synchronization Group (Edit) form opens with the General tab displayed.

    4. Click on the PTP Peers tab button.

5 

Under the Unmonitored tab, perform one of the following:

  1. To create unidirectional IP path monitors, click on the IP tab button.

  2. To create bidirectional IP path monitors, click on the Bidirectional IP tab button.

6 

Configure the filter criteria, if required, and click on the Search button.

7 

Choose one or more peers.

8 

Click on the Create Path Monitor button. The NFM-P creates an IP path monitor and the chosen peer is removed from the list.

Note: The IP Path Monitors are created only for PTP peers for which the peer remote site ID is resolved and mapped to a CPAM-managed router.

9 

Close the Synchronization Group (Edit) form, if applicable.

10 

Close the Synchronization Domain (Edit) form.

11 

Close the Synchronization Manager form.

End of steps