To view an IP path monitor from the synchronization manager

General information

Perform this procedure to navigate to an assigned IP path monitor object from the synchronization domain or synchronization group forms.

Note: You can also view the properties of an IP path monitor from the Synchronization component tree of an NE. See To use the Synchronization component tree for more information.

Steps
 
1 

Choose Tools→Synchronization Manager from the main menu. The Synchronization Manager form opens.

2 

Configure the filter criteria, if required, and click on the Search button.

3 

Choose a synchronization domain and click on the Properties button. The Synchronization Domain (Edit) form opens with the General tab displayed.

4 

Perform one of the following:

  1. To view IP path monitors at the synchronization domain level, click on the PTP Peers tab button.

  2. To view IP path monitors at the synchronization group level, perform the following:

    1. Click on the Sync Groups tab button.

    2. Configure the filter criteria, if required, and click on the Search button.

    3. Choose a synchronization group and click on the Properties button. The Synchronization Group (Edit) form opens with the General tab displayed.

    4. Click on the PTP Peers tab button.

5 

Click on the All tab button.

6 

Configure the filter criteria, if required, and click on the Search button.

7 

Perform one of the following:

  1. To view a unidirectional IP path monitor:

    1. Choose one or more monitored peers and click on the IP Path Monitors button. A dialog box opens.

    2. Click on the Yes button. The IP Path Monitor (Edit) form opens with the General tab displayed. If you specified more than one peer in 1 , several forms open.

    3. View the IP path monitor, as required. See the NSP NFM-P Control Plane Assurance Manager User Guide for more information about IP path monitors.

    4. Close the IP Path Monitor (Edit) form.

  2. To view a bidirectional IP path monitor, perform the following:

    1. Choose one or more monitored peers and click on the Bidirectional IP Path Monitors button. A dialog box opens.

    2. Click on the Yes button. The Bidirectional IP Path Monitor (Edit) form opens with the General tab displayed. If you specified more than one peer in 1 , several forms open.

    3. View the bidirectional IP path monitor, as required. See the NSP NFM-P Control Plane Assurance Manager User Guide for more information about bidirectional IP path monitors.

    4. Close the Bidirectional IP Path Monitor (Edit) form.

8 

Close the Synchronization Group (Edit) form, if applicable.

9 

Close the Synchronization Domain (Edit) form.

10 

Close the Synchronization Manager form.

End of steps