Sample deployment policy configuration

Example details and settings

The following example describes the configuration and operation of an NFM-P deployment policy. See To configure the NFM-P deployment policy for deployment policy configuration information.

The example policy settings are as follows:

• Auto Save Scheme—Every Nth Successful Deployment

  Initiate a device configuration save after the number of configuration changes specified by Auto Save Threshold.

• Auto Save Threshold—3

  Initiate a configuration save after every three successful deployments, if Auto Save Scheme is set to Every Nth Successful Deployment.

• Scheduled Save Scheme—None

  Do not perform a scheduled configuration save on any NE.

• Scheduled Save Interval—1 hour

  If scheduled saves are enabled, perform a save every hour.

• Save Details—disabled

  Save only non-default parameter values.

• Configuration Save Interval—30 seconds

  Delay consecutive configuration save requests for an NE that are less than 30 seconds apart.

• Interval Repeat Limit—5

  Wait up to five Configuration Save Interval periods before performing a configuration save.

• Retry Scheme—Retry Number Of Times

  Retry each deployment the number of times specified by Retry Interval.

• Retry Interval—5 minutes

  Wait five minutes before retrying a failed deployment.

• Retry Threshold—3

  Retry each failed deployment three times.