To open a dynamic LSP path map from the LSP Path form

Steps
 
1 

Choose Manage→MPLS→Dynamic LSPs from the NFM-P main menu. The Manage Dynamic LSPs form opens.

2 

Select a dynamic LSP and click Properties. The Dynamic LSP (Edit) form opens.

3 

Click on the LSP-Path Bindings tab. The LSP paths are listed.

4 

Select an LSP path and click Properties. The LSP-Path Binding (Edit) form opens.

5 

Perform one of the following:

  1. View the topology for provisioned paths:

    1. Click on the Provisioned Path tab. The LSP path hops are listed.

    2. Select a hop and click Topology View. The LSP path map opens showing the LSP path hops between the devices.

  2. View the topology for actual paths:

    1. Click on the Actual Path tab. The actual path hops are listed.

    2. Select a hop and click Topology View. The LSP path map opens showing the actual path hops between the devices.

  3. View the topology for CSPF paths:

    1. Click on the CSPF Path tab. The CSPF path hops are listed.

    2. Select a hop click Topology View. The LSP path map opens showing the CSPF path hops between the devices.

6 

View and close the map.

End of steps