To configure an NFM-P-based schedule
General information
As required, review the NFM-P-based schedules design considerations information in this chapter before starting this procedure.
Steps
1 |
Choose Tools→Schedules→Schedule from the NFM-P main menu. The Schedule form opens. |
2 |
Click Create or choose an existing schedule and click Properties. The NFM-P Schedule (Create|Edit) form opens. Note: You can modify a schedule only when you are logged in as the user account that is assigned to the schedule. To assign a different user account to the schedule, perform To assign a different user account to an NFM-P-based scheduled task . You cannot modify a schedule that is in use by a scheduled task. |
3 |
Configure the required NFM-P Schedule parameters. Note: If you are creating a schedule to apply to policy audits, the Frequency parameter must be set to a value greater than 15 minutes. When an NFM-P-based schedule is not Ongoing and is assigned to a task, the NFM-P raises an alarm when the Current Client End Time expires. |
4 |
Save your changes and close the form. End of steps |