Choose Administration→Generic NE Manager from the NFM-P main menu. The Generic NE Manager form opens.

Choose Generic NE Profile (Generic NE), select a GNE profile in the list, and click Properties. The Generic NE Profile form opens.

The following tabs contain configurable parameters:

• General—contains parameters that identify the GNE type

• CLI Profile—contains parameters that define the console window prompts and commands

• Trap Configuration—contains parameters that define the SNMP trap management configuration

• Interface Types—allows the association of multiple types of interfaces with the GNE profile

  Caution: If you modify the list of interfaces on the Interface Types tab, you must resynchronize the entire GNE, as described in Step 4 .

Modify the required parameters for the GNE profile, click OK, and confirm your actions. The form closes.

If you modified the list of interfaces on the Interface Types tab, perform the following steps:

1. Right-click on the GNE in the NFM-P topology map and choose Resync→Customized Resync. The Resync Site(s) form opens.

2. Click Next and select the Ignore Timestamps parameter.

3. Click Finish and close the Resync Site(s) form. The NFM-P resynchronizes the GNE.

End of steps