To enable or disable SNMP streaming on an NE
Purpose
Perform this procedure to control whether an NE uses SNMP streaming for configuration data transfers to the NFM-P.
Steps
1 |
Right-click on an NE in the network navigation tree and choose Properties. The NE properties form opens. |
2 |
Click on the Polling tab, then on the Management tab. |
3 |
Configure the Enable SNMP Streaming parameter. |
4 |
Save your changes and close the form. |
5 |
If you are performing this procedure for device discovery, see Workflow for device discovery for the next steps. End of steps |