To create an operational group

Before you begin

Multiple objects can be bundled in operational groups. If you change the status of the operational group, the status of every object in the group is changed.

Steps
 
1 

On the equipment tree, right-click on an NE and choose Properties. The Network Element (Edit) form opens.

2 

Click on the Globals tab, and then the Service tab.

3 

Click on the Operational Groups tab and then click Create. The Operational Group (Create) form opens.

4 

Configure the required parameters.

5 

Bind a BFD interface to the operational group.

  1. In the BFD Interface Monitored panel, click Create. The Operational Group BFD Interface (Create) form opens.

  2. Configure the Interface Type parameter.

  3. For service interfaces, click Select in the Service panel. For network interfaces, click Select beside the Interface Name parameter.

  4. Choose a service or interface from the displayed list and click OK.

  5. Configure the Destination Address parameter.

6 

Save your changes and close the forms.

End of steps