To configure the RADIUS CoA port on an NE

Purpose

Perform this procedure to configure the RADIUS change of authorization port on an NE.

Note: You cannot configure the RADIUS CoA port on the 7950 XRS.

Steps
 
1 

On the equipment tree, right-click on an NE and choose Properties. The Network Element (Edit) form opens.

2 

Click on the Globals tab, then on the RADIUS tab.

3 

Configure the RADIUS CoA Port parameter.

Note: If the routing instance is bound to a RADIUS proxy server and the RADIUS CoA port is set to 1812, all CoA messages are received by the RADIUS proxy server and dropped by port 1812.

4 

Save your change and close the form.

End of steps