To configure a new PIN value for a cellular carrier
When to use
Each new 7750 SAR-Hm node that is discovered by the NFM-P may have a default PIN applied to each SIM for security and access rights.
The PIN is configured on a per carrier basis. If a single SIM layout is in use, a single PIN is configured for the domain and applied to all sites. In a dual SIM layout, a PIN is configured for each carrier and applied to all sites for the SIM that applies to that carrier.
You can globally apply and deploy a new security PIN during the ADP or from domains that contain discovered nodes. When a PIN is configured during the domain creation, all subsequent nodes added to the domain through the ADP will have the new PIN applied for the carrier.
Note: Before starting this procedure, you must first create the cellular domain and at least one 7705-SAR Hm node must be present in the domain; see To configure a cellular domain with single SIM deployment or To configure a cellular domain with dual SIM deployment..
Steps
1 |
Choose Manage→Cellular Domain from the NFM-P main menu. The Cellular Domain Manager form opens. |
2 |
Click Search and choose the cellular domain that you want to configure a new PIN value for. The Cellular Domain [Edit] form opens. |
3 |
On the General tab, disable the Enable ADP parameter. |
4 |
If Dual SIM is in use, choose a carrier and click Properties. The Cellular Carrier (Edit) form opens. |
5 |
Enter a new value for the New PIN parameter. |
6 |
Click Apply to save the form and deploy the new PIN entry to all 7705 SAR-Hm nodes in the domain. |
7 |
On the General tab, click the Enable ADP parameter if you want all subsequent nodes added to the domain to have the same PIN applied to them. |
8 |
Close the form. End of steps |