To configure bandwidth CAC for services
|
| |
|
1 |
Choose Manage→Services→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Click Search and choose a VPLS, VPRN, MVPLS, EPIPE, IPIPE, or IES service and click Properties. The Service_Type Service (Edit) form opens.
|
3 |
On the service tree, expand Sites→Site→L2 Access Interface or L3 Access Interface.
|
4 |
Right-click on the L2 access interface or L3 Access Interface that you want to configure the bandwidth CAC for and click Properties. The Service_Type L2 or L3 Access Interface form opens.
|
5 |
Click on the Port tab and configure the Mode parameter to Access or Hybrid mode to view the Access Bandwidth panel.
Note: By default, the No Bandwidth parameter is configured in the Access Bandwidth panel which excluded the port from the CAC function.
|
6 |
As required, configure the Bandwidth (kbps) and Book Factor (Percentage) parameters.
|
7 |
Save your changes and close the forms.
|
To configure bandwidth CAC for LAGs
|
| |
|
8 |
Choose Equipment from the navigation tree view selector.
|
9 |
On the equipment navigation tree, expand Network→NE→Logical Groups→LAGs→LAG n.
|
10 |
Right-click on the LAG n object that you want to configure the bandwidth CAC for and choose Properties. The LAG (Edit) form opens.
|
11 |
On the General tab, configure the Mode parameter to Access or Hybrid mode to access the bandwidth CAC panel.
|
12 |
Click on the Access tab, and as required, configure the Bandwidth (kbps) and Book Factor (Percentage) parameters.
Note: By default, the No Bandwidth parameter is configured in the Access Bandwidth panel which excluded the LAG from the CAC function.
Note: When a LAG is configured, the admin bandwidth and booking factor on its constituent ports are ignored.
|
13 |
Save your changes and close the forms.
End of steps |