| |
|
1 |
Choose Manage→Service Tunnels from the NFM-P main menu. The Manage Service Tunnels form opens.
|
2 |
Perform one of the following:
-
Click Create→Ethernet Ring Element. The Select Network Elements form opens.
Select a site for the Ethernet ring element and click OK. The Ethernet Ring Element (Create) form opens.
You can create multiple ring elements by selecting multiple sites.
-
Select an existing ring element and click Properties. The Ethernet Ring Element (Edit) form opens.
|
3 |
Configure the required parameters.
The ID and Site ID parameters are only configurable when you are creating a new Ethernet ring element.
|
4 |
Configure the parameters for a sub-ring, if required.
|
5 |
Click on the Path Endpoints tab to configure the path endpoints for the Ethernet ring element.
|
6 |
Click Create or select an existing path endpoint and click Properties. The Ethernet Ring Path Endpoint (Create|Edit) form opens.
|
7 |
Configure the required parameters.
The Path ID parameter is only configurable when you are creating a new Ethernet Ring Path Endpoint.
|
8 |
Click on the Port tab. Perform the following steps:
-
Select a terminating port for the ring path endpoint.
-
Configure the R-APS Tag (Outer Encapsulation Value) and R-APS Tag (Inner Encapsulation Value) parameters.
|
9 |
Save your changes and close the forms.
End of steps |