Physical Link parameters
Bandwidth (Mbps)
The Bandwidth parameter specifies the maximum bandwidth allowed for each specified CoS. The default value is derived from the speed of the physical port. Because there are eight classes of service, the default value for each CoS is the speed of the port divided by eight. The XML values are shown in Table A-3, Bandwidth (Mbps) parameters .
Note: This parameter is only available if service CAC is configured. See the NSP System Administrator Guide for more information.
Table A-3: Bandwidth (Mbps) parameters
|
Bandwidth (Mbps) parameter name |
XML string |
Maximum bandwidth allowed for: |
|---|---|---|
|
Bandwidth (Mbps) first field in column |
cos0BW |
CoS 0 |
|
Bandwidth (Mbps) second field in column |
cos1BW |
CoS 1 |
|
Bandwidth (Mbps) third field in column |
cos2BW |
CoS 2 |
|
Bandwidth (Mbps) fourth field in column |
cos3BW |
CoS 3 |
|
Bandwidth (Mbps) fifth field in column |
cos4BW |
CoS 4 |
|
Bandwidth (Mbps) sixth field in column |
cos5BW |
CoS 5 |
|
Bandwidth (Mbps) seventh field in column |
cos6BW |
CoS 6 |
|
Bandwidth (Mbps) eighth field in column |
cos7BW |
CoS 7 |
Booking Factor (%)
The Booking Factor parameter specifies the actual amount of bandwidth being booked on the physical link. For example, if a service requests 10 Mbps on CoS 0 and the booking factor on CoS 0 is 50%, then the actual amount of booked bandwidth is 5Mbs. The XML values are shown in Table A-4, Booking Factor (%) parameters .
Note: This parameter is only available if service CAC is configured. See the NSP System Administrator Guide for information.
Table A-4: Booking Factor (%) parameters
|
Booking Factor (%) parameter name |
XML string |
Bandwidth being booked for: |
Default value |
|---|---|---|---|
|
Booking Factor (%) first field in column |
cos0BookFactor |
CoS 0 |
100 |
|
Booking Factor (%) second field in column |
cos1BookFactor |
CoS 1 |
100 |
|
Booking Factor (%) third field in column |
cos2BookFactor |
CoS 2 |
100 |
|
Booking Factor (%) fourth field in column |
cos3BookFactor |
CoS 3 |
100 |
|
Booking Factor (%) fifth field in column |
cos4BookFactor |
CoS 4 |
100 |
|
Booking Factor (%) sixth field in column |
cos5BookFactor |
CoS 5 |
100 |
|
Booking Factor (%) seventh field in column |
cos6BookFactor |
CoS 6 |
100 |
|
Booking Factor (%) eighth field in column |
cos7BookFactor |
CoS 7 |
100 |
Utilization Threshold (%)
The Utilization Threshold parameter specifies the percentage of bandwidth that, when exceeded, raises an alarm indicating that the used bandwidth has exceeded the maximum allowed bandwidth on the link. For example, if the threshold is set to 75% and the maximum allowed bandwidth is 20 Mbps, then an alarm will be raised when the used bandwidth value exceeds 15 Mbps. The XML values are shown in Table A-5, Utilization Threshold (%) parameters .
Note: This parameter is only available if service CAC is configured. See the NSP System Administrator Guide for information.
Table A-5: Utilization Threshold (%) parameters
|
Utilization Threshold (%) parameter name |
XML string |
Bandwidth currently being used for: |
|---|---|---|
|
Utilization Threshold (%) first field in column |
cos0BWThreshold |
CoS 0 |
|
Utilization Threshold (%) second field in column |
cos1BWThreshold |
CoS 1 |
|
Utilization Threshold (%) third field in column |
cos2BWThreshold |
CoS 2 |
|
Utilization Threshold (%) fourth field in column |
cos3BWThreshold |
CoS 3 |
|
Utilization Threshold (%) fifth field in column |
cos4BWThreshold |
CoS 4 |
|
Utilization Threshold (%) sixth field in column |
cos5BWThreshold |
CoS 5 |
|
Utilization Threshold (%) seventh field in column |
cos6BWThreshold |
CoS 6 |
|
Utilization Threshold (%) eighth field in column |
cos7BWThreshold |
CoS 7 |