To configure UDP relay, DHCP snooping, and DHCP Option 82 on OmniSwitch routing instances

Note: DHCPv6 snooping is supported only for standard VLAN on the OS 6450.

Note: The routing instance must be the default routing instance.

UDP Server Statistics/UDP Service Statistics will be lost as part of the parent change from Bridge Instance to Routing Instance.

Steps
 
1 

In the navigation tree routing view, expand Network→OmniSwitch→Routing Instance.

2 

Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

3 

Click on the UDP Relay tab to configure UDP relay if required.

4 

Configure the required parameters in the UDP BOOTP/DHCP Relay General Configuration panel.

5 

Configure the parameters in the Relay Information Configuration panel if you need to use the DHCP Option 82 functionality.

6 

Configure the PXE Support parameter if you need support for PXE devices.

7 

Click on the DHCP Snooping tab to configure DHCP snooping.

In the DHCPv6 Snooping Configuration panel, configure the DHCPv6 Snooping Mode parameter from the drop-down menu.

8 

Configure the parameters as required.

9 

Click on the Relay Services tab to configure UDP port relay services if required.

Perform the following steps:

  1. Click Create.

  2. Configure the UDP Relay Service parameter.

    If you selected the Other option, configure the Relay Service Port and Relay Service Description parameters.

  3. Save your changes and close the form. The Routing Instance (Edit) form reappears.

10 

Click on the Relay Destinations tab and click Create. The Create UDP Service Destinations form opens.

11 

Click Select. The Select UDP Service - UDP Relay Service Destination form opens.

Perform the following steps:

  1. Choose a UDP relay service and click OK.

  2. Configure the Forwarding Address parameter, if required.

  3. Click Next. The Select VLANs step is displayed.

  4. Configure the search filter and click Search. The Select VLANs form displays the VLANs that match the search criteria.

  5. Choose one or more VLANs to be used to forward the UDP traffic.

  6. Click Finish. The selected VLANs appear in the relay destinations list and the Routing Instance (Edit) form reappears.

12 

Save your and close the form.

End of steps