| |
|
1 |
Choose Manage→Redundancy→Node Redundancy from the NFM-P main menu. The Manage Node Redundancy form opens.
|
2 |
Choose MC AOS Group (Aos Redundancy) and click Search.
|
3 |
Choose an MC AOS group and click Properties. The MC AOS Group (Edit) form opens.
|
4 |
Click on the Associated Groups tab.
|
5 |
Right-click on MC AOS VFLink Group and choose Create MC AOS VFLink Group. The AOS VFLink Group (Create) form opens.
|
6 |
Select a Default Vlan for VFLink and click OK.
|
7 |
Click Apply.
|
8 |
Click Properties in the First MultiChassis VFLinkEnd (Chassis Id 1) panel. The AOS VF Link End form opens.
|
9 |
Click on the VF Link End Member Port tab and click Create. The Select Port - AOS VF Link End form opens.
Note: Up to eight member ports can be added for each OmniSwitch; the ports must be access ports with a speed of 10Gb or higher.
|
10 |
Select one or more ports and click OK. The Select Port - AOS VF Link End form closes.
|
11 |
Click Properties in the Second MultiChassis VFLinkEnd (Chassis Id 2) panel. The AOS VF Link End form opens.
|
12 |
Click on the VF Link End Member Port tab and click Create. The Select Port - AOS VF Link End form opens.
Note: Up to eight member ports can be added for each OmniSwitch; the ports must be access ports with a speed of 10Gb or higher.
|
13 |
Choose one or more ports and click OK. The Select Port - AOS VF Link End form closes.
Note: This member port cannot be used as a learned port security, VLAN access interface, or LAG member. Attempting to use the member port in such a way causes a deployment failure.
|
14 |
Save your changes and close the forms.
End of steps |