To configure L3 forwarding from a VPLS or MVPLS to an IES or VPRN service
Purpose
Perform this procedure to configure MC ring group traffic forwarding through a BSA spoke SDP to a BSR L3 access interface in an IES or VPRN service, as shown in Figure 45-1, Simple subscriber aggregation network .
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Click Search. A list of services is displayed. |
3 |
Select a VPLS or MVPLS and click Properties. The service properties form opens. |
4 |
Click on a site in the service navigation tree. The site properties form opens. |
5 |
Click on the Default Gateway tab. |
6 |
Configure the parameters, which specify the IP and MAC addresses of the default gateway to which the VPLS is to forward L3 traffic. |
7 |
Click OK to save your changes and close the site properties form. |
8 |
Click OK to save your changes and close the service properties form. End of steps |