To create an LSP path using a tunnel template

Purpose

Before you can create an LSP path from a tunnel template, you must create the tunnel template. You can use an existing LSP path to create a tunnel template.

Steps
 
1 

Choose Manage→MPLS→Dynamic LSPs from the NFM-P main menu. The Manage Dynamic LSPs form opens.

2 

Click on the Create from Template button. The Create Dynamic LSP from Template list form opens displaying previously created templates.

3 

Choose an LSP template. The template must be one where you associated a child LSP Path template to the parent LSP template.

4 

Click OK. The Create Dynamic LSP from Template form opens. See To create a Dynamic or segment routing LSP from a tunnel template for information about creating a Dynamic LSP from a template.

5 

Click OK and perform one of the following:

  1. If the Show Created Object parameter is enabled on the template, the Dynamic LSP (Edit) form opens. Go to Step 6 .

  2. Open the Dynamic LSPs (Edit) form.

    Use the following steps:

    1. Choose Manage→MPLS→Dynamic LSPs from the NFM-P main menu. The Manage Dynamic LSPs form opens.

    2. Select the Dynamic LSP that you created in Step 4 and click Properties. The Dynamic LSP (Edit) form opens.

6 

Click on the LSP-Path Bindings tab.

7 

Click on the Create from Template button. A pop-up menu appears with a selection of LSP path templates.

8 

Click on the template you require for the LSP path.

9 

Configure the required parameters.

10 

Click on the Inheritance tab.

11 

Configure the Overridden Properties parameter.

12 

Save your changes and close the forms.

End of steps