To configure MPLS-TP on a routing instance

Purpose

Use the following procedure to configure MPLS-TP on a routing instance. Ensure that you enable MPLS-TP on all NEs that are participating in the MPLS-TP network, as described in To enable MPLS-TP on a routing instance .

Steps
 
1 

In the navigation tree Routing view, expand Network→NE→Routing Instance→MPLS-TP.

2 

Right-click on a MPLS-TP icon and choose Properties. The MPLS-TP, Routing Instance (Edit) form opens.

3 

Configure the required parameters

The Global ID and Node ID parameters are identifiers of an MPLS-TP site on the NE. The TP-LSP ID Minimum and TP-LSP ID Maximum parameters reserve a range of IDs that you use for MPLS-TP LSPs.

4 

Configure the Administrative State parameter in the States panel.

Configure a proactive OAM template
 
5 

Right-click on a MPLS-TP icon and choose Properties. The MPLS-TP, Routing Instance (Edit) form opens.

Perform the following steps:

  1. Configure the required parameters.

  2. Click Select in the BFD Template panel and click Search. A list of configured BFD template policies appears. See To configure a BFD template policy for information about how to create a BFD template policy.

  3. Choose a BFD template policy and click OK. The Proactive OAM Template (Create) form refreshes with the BFD template information.

  4. Save your changes and close the form. The MPLS-TP, Routing Instance (Edit) form reappears.

Configure a protection template
 
6 

Click on the Protection Template tab and click Create.The Protection Template, Routing Instance (Create) form opens.

Perform the following steps:

  1. Configure the required parameters.

  2. Save your changes and close the form. The MPLS-TP, Routing Instance (Edit) form reappears.

7 

Save your changes and close the form.

End of steps