To configure an IGMP site on a router

Purpose

Before you can configure an IGMP site on a router, you must enable IGMP on a routing instance. See To enable IGMP on a routing instance .

Steps
 
1 

In the navigation tree Routing view, expand Network→NE→Routing Instance→IGMP.

2 

Right-click on the IGMP icon and choose Properties. The IGMP Site (Edit) form opens.

3 

Configure the required parameters.

4 

Click on the SSM Translation tab to configure SSM Translation.

Perform the following steps:

  1. Click Create. The SSM Translation (Create) form opens.

  2. Configure the required parameters.

  3. Save your changes and close the form. The new SSM Translation entry appears on the form.

5 

Click on the Interfaces tab to add an IGMP interface; see To configure an IGMP interface for information about configuring an IGMP interface.

6 

Click on the Group Interfaces tab to view IES group interfaces added to IGMP.

7 

Click on the LDP Tunnel Interfaces tab to configure an LDP tunnel interface entry.

Perform the following steps:

  1. Click Create. The LDP IGMP Tunnel Interface (Create) form opens.

  2. Select an LDP tunnel interface.

  3. Click on the Static Group/Source tab to configure a static multicast entry.

  4. Click Create. The StaticGrpSrc (Create) form opens.

  5. Configure the required parameters.

  6. Save your changes and close the forms.

8 

Click on the RSVP Tunnel Interfaces tab to configure an RSVP tunnel interface.

Perform the following steps:

  1. Click Create. The RSVP IGMP Tunnel Interface (Create) form opens.

  2. Select an RSVP IGMP tunnel interface.

  3. Click on the Static Group/Source tab to configure a static multicast entry.

  4. Click Create. The StaticGrpSrc (Create) form opens.

  5. Configure the required parameters.

  6. Save your changes and close the forms.

9 

Click on the Static Range Group tab to configure static ranges. Perform the following:

  1. Click Create to add a static range group. The Static Grp Range Src form opens.

  2. Configure the required parameters.

  3. Save your changes and close the form.

10 

Click on the following tabs to view and edit information.

  • Multicast Group/Source

  • Statistics

  • Faults

11 

Save your changes and close the forms.

End of steps