To configure an AA transit IP policy

Steps
 
1 

Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.

2 

Click Create→AA Transit IP Policy or select an AA transit IP policy and click Properties. The AA Transit IP Policy (Create | Edit) form opens.

3 

Configure the parameters.

4 

Choose a default application profile.

Only application profiles with the same Group ID and Partition ID values as the AA transit IP policy are listed.

5 

Choose a subscriber identification policy.

6 

Configure the following required parameters.

The following parameters cannot be enabled at the same time:

  • DHCP, and RADIUS or Seen IP

  • Auto Create, and DHCP or RADIUS

7 

If the RADIUS parameter is set to Enabled, select a subscriber authentication policy and an AA RADIUS accounting policy.

8 

If the Diameter parameter is set to Enabled, select a diameter application policy.

9 

To add one or more static subscribers to the AA transit IP policy:

  1. Click on the Subscribers tab.

  2. Click Create. The Transit Subscriber (Create) form opens.

  3. Configure the Displayed Name parameter.

  4. Choose an application profile.

  5. Click on the IP Addresses tab.

  6. Click Create. The Transit IP Address (Create) form opens.

  7. Configure the Address parameter.

  8. Save your changes and close the form.

10 

Save your changes and close the forms.

End of steps