RSVP parameters
Down Threshold (%)
The Down Threshold (%) parameters (1 through 16) specify the Down Threshold level percentages for reserved bandwidth per interface. Any reserved bandwidth change per interface is compared to the configured threshold levels. An IGP TE update is triggered if the configured threshold levels are crossed, as a result of either an LSP setup or teardown. Threshold levels configured for the NE at the RSVP level can also be inherited by all configured RSVP interfaces under the NE.
You can configure from one to sixteen Down Threshold percentage levels. If you configure one or more thresholds to a non-default value, then the configured Down Thresholds will be rearranged in descending order. The range is -1, 0 to 100, where -1 indicates that the threshold level is disabled.
Table A-37: Down Threshold (%) parameters
|
Down Threshold (%) parameter name |
XML string |
Default value |
|---|---|---|
|
Down Threshold 1 (%) |
teThresholdLevelDown1 |
100 |
|
Down Threshold 2(%) |
teThresholdLevelDown2 |
99 |
|
Down Threshold 3 (%) |
teThresholdLevelDown3 |
98 |
|
Down Threshold 4 (%) |
teThresholdLevelDown4 |
97 |
|
Down Threshold 5 (%) |
teThresholdLevelDown5 |
96 |
|
Down Threshold 6(%) |
teThresholdLevelDown6 |
95 |
|
Down Threshold 7 (%) |
teThresholdLevelDown7 |
90 |
|
Down Threshold 8 (%) |
teThresholdLevelDown8 |
85 |
|
Down Threshold 9 (%) |
teThresholdLevelDown9 |
80 |
|
Down Threshold 10(%) |
teThresholdLevelDown10 |
75 |
|
Down Threshold 11 (%) |
teThresholdLevelDown11 |
60 |
|
Down Threshold 12 (%) |
teThresholdLevelDown12 |
45 |
|
Down Threshold 13 (%) |
teThresholdLevelDown13 |
30 |
|
Down Threshold 14 (%) |
teThresholdLevelDown14 |
15 |
|
Down Threshold 15 (%) |
teThresholdLevelDown15 |
0 |
|
Down Threshold 16 (%) |
teThresholdLevelDown16 |
-1 |
Up Threshold (%)
The Up Threshold (%) parameters (1 through 16) specify the Up Threshold level percentages for reserved bandwidth per interface. Any reserved bandwidth change per interface is compared to the configured threshold levels. An IGP TE update is triggered if the configured threshold levels are crossed, as a result of either an LSP setup or teardown. Threshold levels configured for the NE at the RSVP level can also be inherited by all configured RSVP interfaces under the NE.
You can configure from one to sixteen Up Threshold percentage levels. If you configure one or more thresholds to a non-default value, then the configured Up Thresholds will be rearranged in ascending order. The range is -1, 0 to 100, where -1 indicates that the threshold level is disabled.
Table A-38: Up Threshold (%) parameters
|
Up Threshold (%) parameter name |
XML string |
Default value |
|---|---|---|
|
Up Threshold 1 (%) |
teThresholdLevelUp1 |
0 |
|
Up Threshold 2(%) |
teThresholdLevelUp2 |
15 |
|
Up Threshold 3 (%) |
teThresholdLevelUp3 |
30 |
|
Up Threshold 4 (%) |
teThresholdLevelUp4 |
45 |
|
Up Threshold 5 (%) |
teThresholdLevelUp5 |
60 |
|
Up Threshold 6(%) |
teThresholdLevelUp6 |
75 |
|
Up Threshold 7 (%) |
teThresholdLevelUp7 |
80 |
|
Up Threshold 8 (%) |
teThresholdLevelUp8 |
85 |
|
Up Threshold 9 (%) |
teThresholdLevelUp9 |
90 |
|
Up Threshold 10(%) |
teThresholdLevelUp10 |
95 |
|
Up Threshold 11 (%) |
teThresholdLevelUp11 |
96 |
|
Up Threshold 12 (%) |
teThresholdLevelUp12 |
97 |
|
Up Threshold 13 (%) |
teThresholdLevelUp13 |
98 |
|
Up Threshold 14 (%) |
teThresholdLevelUp14 |
99 |
|
Up Threshold 15 (%) |
teThresholdLevelUp15 |
100 |
|
Up Threshold 16 (%) |
teThresholdLevelUp16 |
-1 |