Schedules parameters

Change Current User To

The Change Current User To parameter specifies the NFM-P user to which the NFM-P scheduled task is to be assigned. The options are all configured user accounts. The default is admin, which is the default NFM-P account.

Enable

The Enable parameter specifies whether to enable or disable the configurability of the Delay Time (seconds) parameter.

The options are:

• Enable

• Disable (default)

Run Every Days

The Run Every Days parameter specifies whether the NFM-P schedule runs every n days, where n is a numerical value that you set using the up and down arrows. The parameter is configurable when the Frequency parameter is set to Per Day. The range is 1 to 2 147 483 647. The default is 1.

Run Every Hours

The Run Every Hours parameter specifies whether the NFM-P schedule runs every n hours, where n is a numerical value set using the up and down arrows. The parameter is configurable when the Run Every Hour parameter is disabled. The range is 1 to 2 147 483 647. The default is 1.

Run Every Minutes

The Run Every Minutes parameter specifies that the NFM-P schedule runs every n minutes, where n is a numerical value set using the up and down arrows. The parameter is configurable when the Run Every Minute parameter is disabled.

Run Every Months

The Run Every Months parameter specifies that the NFM-P schedule runs every n months, where n is a numerical value set using the up and down arrows. The parameter is configurable when the Frequency parameter is set to Per Month. The range is 1 to 2 147 483 647. The default is 1.

A month is based on a 30-day interval.

Run Every Seconds

The Run Every Seconds parameter specifies that the NFM-P schedule runs every n seconds, where n is a numerical value set using the up and down arrows. The parameter is configurable when the Run Every Second parameter is disabled. The range is 1 to 2 147 483 647. The default is 1.

Time Alignment Setting

The Time Alignment Setting parameter specifies the base minute with which the NFM-P schedule aligns. The parameter is used with the Run Every Minutes parameter. The range is 0 to 59. The default is 0.