Choose Policies→QoS→SROS QoS→Scheduler→Policer Control from the NFM-P main menu. The Policer Control Policies form opens.

Click Create or choose an existing policer control policy and click Properties. The Policer Control Policy (Create | Edit) form opens.

Configure the required parameters.

Click on the Arbiter tab.

1. Click Create. The Arbiter (Create) form opens.

2. Configure the required parameters.

   The Parent Arbiter parameter is configurable when the Tier parameter is set to 2.

3. Click OK. The Arbiter (Create) form closes.

Optionally, click on the Graphical Arbiters tab to view a graphical display of the arbiter hierarchy within the policer control policy. You can perform any of the following steps:

1. Right-click on the grid and select New Arbiter from the drop-down menu. The Arbiter (Create) form opens. You can create a new arbiter, as described in Step 4 .

2. Right-click on an arbiter object and select Edit from the drop-down menu. The Arbiter (Edit) form opens. You can change the arbiter, as described in Step 4 .

3. Right-click on an arbiter and select Remove from the drop-down menu. The arbiter object is removed from the hierarchy.

4. Click on a Tier 2 arbiter object and draw a line to a Tier 1 arbiter object. The Tier 1 arbiter becomes the parent of the Tier 2 arbiter.

Click on the Tree tab to view a hierarchical display of the policer control policy properties and sub components.

Click on the Priority Level tab to configure the MBS contribution for eight priority levels. For each level, configure the Cumulative MBS Contribution and Fixed MBS contribution parameters.

Click Apply.

Click Distribute to distribute the policy to NEs. See To release and distribute a policy for more information.

Click OK to save the policy and close the forms.

End of steps