To configure a 7210/7250 Dot1p classification policy

Purpose

A 7210/7250 Dot1p classification policy associates ingress dot1p values, forwarding classes, and profiles. The policy is assigned to 7210,7250 and 1830 SAP Access Ingress policies, 7210 and 1830 Network policies, and 7250 Ingress CoS policies.

The NFM-P provides a default 7210/7250 Dot1p classification policy. The default policy is applied if no user-configured policy is explicitly assigned.

The 7210 SAS-K supports 7210/7250 Dot1p classification policies assigned to access ingress and network policies on the device.

Steps
 
1 

Choose Policies→QoS→SROS QoS→Ingress Classification→7210/7250 Dot1p from the NFM-P main menu. The 7210/7250 Dot1p form opens.

2 

Click Create or choose an existing policy and click Properties. The Dot1p Classification Policy (Create|Edit) form opens.

3 

Configure the required parameters on the General tab.

The values configured in the Default Forwarding Class panel are applied to packets that do not match any of the associations on the Dot1p Classification tab; see Step 5.

4 

Click on the Dot1p Classification tab.

5 

Associate dot1p bits with FCs and profiles:

  1. Click Create, or choose an existing entry and click Properties. The Ingress Dot1p, Dot1p Classification Policy (Create) form opens.

  2. Configure the required parameters.

  3. Save your changes.

6 

Save your changes and close the forms.

End of steps