Sample VLL service configuration

Sample VLL service

The following figure shows a sample VLL service.

Figure 76-8: Sample VLL service
Sample VLL service
Configuration steps

Assuming the core IP/MPLS network and service tunnels have already been configured, the following high-level tasks are required to configure this sample VLL service.

 
1 

Configure policies as required, for example, access ingress and egress interface, ATM, Scheduler, ACL IP and ACL MAC, Accounting, and ANCP policies.

2 

Configure ports as access ports for use in the service, if applicable.

3 

Configure service tunnels as required.

4 

Create and configure Subscriber 1.

5 

Create and configure Service 1.